 |
Rattler |
| The Rattler can be placed up to 2000 ft away from the tattletale base unit depending on the objects and structures between the Rattler and the base unit. The Rattler is sensitive to movement and vibration.
The Rattler unit can be placed on top of the item(s) to be protected. It can also be attached to any metal object with the integrated magnets. For example: on top of a stack of lumber, drywall or other building materials, on the engine cowling of a backhoe, on top of appliances or HVAC units prior to installation. When the tattletale™ alarm unit is armed the Rattler will detect any movement or vibration and create an alarm condition. ADI Part Number: 7T-RATTLER. |
 |
|
|
|
|
| |
|
 |
The Loop (10 foot) |
| The LOOP (10 foot) is a sensor device that can be used indoors and outdoors. You can think of it as an electronic bike lock that you can use to tie up your tools and equipment (such as backhoes, generators, ladders, etc.) If the LOOP is cut or disconnected when the tattletale alarm unit is armed, an instant alarm signal will be transmitted. The LOOP can be placed up to 2000 feet away from the alarm unit depending on structures and objects between it and the tattletale. The LOOP can operate normally between 0°F and 120°F and is completely waterproof. The 3V lithium battery included will typically last for 1-2 years. ADI Part Number: 7T-THELOOP10. |
|
|
|
|
|
| |
|
 |
The Loop (20 foot) |
| The LOOP (20 foot) is a sensor device that can be used indoors and outdoors. You can think of it as an electronic bike lock that you can use to tie up your tools and equipment (such as backhoes, generators, ladders, etc.) If the LOOP is cut or disconnected when the tattletale alarm unit is armed, an instant alarm signal will be transmitted. The LOOP can be placed up to 2000 feet away from the alarm unit depending on structures and objects between it and the tattletale. The LOOP can operate normally between 0°F and 120°F and is completely waterproof. The 3V lithium battery included will typically last for 1-2 years. ADI Part Number: 7T-THELOOP20. |
|
|
|
|
|
| |
|
 |
Dual-Detection Outdoor Motion Detector |
| The Dual-Detection Outdoor Motion Detector can be placed up to 2000 feet from the tattletale unit depending on structures and objects in-between the detector and the tattletale. It is sensitive to moving heat (infrared radiation) and has an adjustable coverage area. The maximum coverage area is 40 feet by 90°. It can operate normally between -4°F and 122°F and is weather resistant. The 3V and 9V lithium batteries included will typically last for 2-3 years. ADI Part Number: 7T-OUTDRMOTI. |
|
|
|
|
|
| |
|
|
Dual-detection High Powered Outdoor Motion |
| The High Powered Motion is used in cases where you need a stronger signal between the accessory and the tattlelate unit. The Dual-Detection Outdoor Motion Detector can be placed up to 2000 feet from the tattletale unit depending on structures and objects in-between the detector and the tattletale. It is sensitive to moving heat (infrared radiation) and has an adjustable coverage area. The maximum coverage area is 40 feet by 90°. It can operate normally between -4°F and 122°F and is weather resistant. The 3V and 9V lithium batteries included will typically last for 2-3 years. ADI Part Number: 7T-HIPOOUTMO. |
|
|
|
|
|
| |
|
 |
Borderguard |
| The Borderguard is designed to protect the exterior of a building or fence. Borderguard is a PIR (passive infrared motion detector) which detects the heat energy emitted by humans. The detector utilizes dual beams that project 40 feet from each side of the unit and is best mounted at a height of 36-48 inches. Both beams must be blocked at the same time to activate the detector. This feature eliminates the potential of false alarms caused by animals in the outdoor environment. It can operate normally between -4°F and 122°F and is weather resistant. The 3V and 9V lithium batteries included will typically last for 2-3 years. ADI Part Number: 7T-BORDERGRD |
|
|
|
|
|
| |
|
